UPHILL TABLET POLISHING DEDUSTER

Some customers are interested in our uphill tablet deduster. The machine is mainly used for tablet dedusting, polishing and lifting. It can be combined with tablet press machine, metal detector and vacuum cleaner, etc, which can be applicable in pharmacy, food, chemical engineering, electronics, and other industries.

There are following main features for the uphill tablet deduster:

1) Long dedusting path for automatic tablet polish and high quality dedusting without any damage to the tablet itself.

2) Production speed can be adjusted by customization.

3) The performance is reliable with high efficiency and low noise.

4) It is easy to disassemble and assemble and clean without any dead angle.

Before operation, connect the machine to the tablet press machine, adjust the tablet inlet height accordingly, and then connect the vacuum cleaner and dedusting air pipe. The earthing terminal and ground connection should be well. Wrong power supply will cause damage to the driver, controller and other electrical components, so please make sure the input power and cable plug can meet the requirement. The production speed should be appropriate.

The machine should be placed on the horizontal ground and all accessories should be installed. During operation, check the machine regularly (normally 7-14 working days), otherwise, the broken parts may cause tablet deformation or damage, for example. Only professionals can disassemble and assemble the machine. When the machine is not put into operation for a long time, the inside and outside parts of the machine should be kept clean and applied to some protective measure, such as painting the protective oil on the machine surface. We provides detailed user guide for installation, operation, parts replacements and maintenance of the machine.

If you are interested in tablet pills Polishing And Deduster Machine, please contact us!